Store

KEF Q550

Q550

109,000.00 /Pair

Description

KEF Q550

“Sit anywhere” Uni-Q Sound

At the heart of the evolved Q Series is the Uni-Q driver array. KEF’s signature innovation places the tweeter in the acoustic center of the midrange cone, bringing the acoustic ideal of a single point source closer than ever to realisation. The result is a more detailed, more accurate three-dimensional sound image, which is dispersed more evenly throughout the room than is possible with a conventional speaker. Uni-Q’s ultra-wide dispersion is further enhanced by KEF’s ‘tangerine’ waveguide over the tweeter dome.

Uni-Q sound taken to the next level

The addition of the Damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass response.

Redesigned Bass Drivers

Low-frequency (LF) drivers now have a larger roll surround, along with a new spider suspension to produce cleaner bass at high volumes. A new cone structure improves midrange clarity, and an enhanced Auxiliary Bass Radiators (ABRs) with a new surround and rear suspension delivers better controlled and more impressive bass.

New Cabinet Design

In our newest line of Q Series Floorstanders the Uni-Q driver has been placed in sealed box within the cabinet. The closed box midrange cabinet design reduces the load on the Uni-Q midrange cone, increasing clarity and detail while delivering cleaner, punchier bass. Midrange clarity is enhanced again through improvements to the mid-bass driver that allowed the DC blocking capacitor to be eliminated. Its removal also created a more natural bass roll-off between the drivers.

New Product Tab

Model: Q550 Floorstanding Speaker
Design: Two and a half-way bass reflex
Drive Units

  • 130mm (5.25in.) aluminum Uni-Q
  • 25mm (1in.) vented aluminum dome HF
  • 130mm (5.25in.) aluminum LF
  • 2x 130mm (5.25in.) aluminum ABR

Frequency Range Free Field (-6dB): 45Hz
Frequency Response (±3dB): 58Hz – 28kHz
Crossover Frequency: 2.5kHz
Amplifier Requirements: 15-130W
Sensitivity (2.83V/1m): 87dB
Maximum Output: 110dB
Nominal Impedance: 8? (min.3.5?)
Weight: 14.5kg (32 lbs)
Dimensions (H X W X D): 873mm (34.37 inches) x 180mm (7.08 inches) x 278mm (10.94 inches)
Dimensions (H X W X D) *with Rubber Feet: 926mm (36.45 inches) x 299mm (11.77 inches) x 310mm (12.20 inches)

Get in Touch





    Office Address

    PRO FX Tech Pvt Ltd
    Barton Centre,
    Ground Floor, M.G.Road,
    Bengaluru - 560001
    INDIA

    Contact Us

    Tel No: 08043718978
    For Enquiries : sales@profx.com
    For Service : service@profx.com
    Open on all days: 11 am to 9 pm

    Follow US

    Copyright © 2021 All Rights Reserved. PROFX

    Top