Store

Q950

239000 / Pair

Description

KEF Q950

“Sit anywhere” Uni-Q Sound

At the heart of the evolved Q Series is the Uni-Q driver array. KEF’s signature innovation places the tweeter in the acoustic center of the midrange cone, bringing the acoustic ideal of a single point source closer than ever to realisation. The result is a more detailed, more accurate three-dimensional sound image, which is dispersed more evenly throughout the room than is possible with a conventional speaker. Uni-Q’s ultra-wide dispersion is further enhanced by KEF’s ‘tangerine’ waveguide over the tweeter dome.

Uni-Q sound taken to the next level

The the addition of the Damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass response.

Redesigned Bass Drivers

Low-frequency (LF) drivers now have a larger roll surround, along with a new spider suspension to produce cleaner bass at high volumes. A new cone structure improves midrange clarity, and an enhanced Auxiliary Bass Radiators (ABRs) with a new surround and rear suspension delivers better controlled and more impressive bass.

New Cabinet Design

In our newest line of Q Series Floorstanders the Uni-Q driver has been placed in sealed box within the cabinet. The closed box midrange cabinet design reduces the load on the Uni-Q midrange cone, increasing clarity and detail while delivering cleaner, punchier bass. Midrange clarity is enhanced again through improvements to the mid-bass driver that allowed the DC blocking capacitor to be eliminated. Its removal also created a more natural bass roll-off between the drivers.

New Product Tab

Model: Q950 Floorstanding Speaker
Design: Two and a half-way bass reflex

  • 200mm (8in.) aluminium Uni-Q
  • 38mm (1.5in.)vented aluminium dome HF
  • 200mm (8in.) aluminium LF
  • 2 x 200mm (8in.)aluminium ABR

Frequency Range Free Field (-6dB): 38Hz
Frequency Response (±3dB): 44Hz-28kHz
Crossover Frequency: 2.2kHz
Amplifier Requirements: 15-200W
Sensitivity (2.83V/1m): 91dB
Maximum Output: 113dB
Nominal Impedance: 8? (min.3.2?)
Weight: 20.6kg (45.4 lbs)
Dimension (H X W X D): 1062mm (41.81 inches) x 244mm (9.60 inches) x 328mm (12.91 inches)
Dimension (H X W X D) *with Rubber Feet: 1116mm (43.93 inches) x 357mm (14.05 inches) x 328mm (12.91 inches)

Get in Touch





    Office Address

    PRO FX Tech Pvt Ltd
    Barton Centre,
    Ground Floor, M.G.Road,
    Bengaluru - 560001
    INDIA

    Contact Us

    Tel No: 08043718978
    For Enquiries : sales@profx.com
    For Service : service@profx.com
    Open on all days: 11 am to 9 pm

    Follow US

    Copyright © 2023 All Rights Reserved. PROFX

    Top