DLC-1500.4 AMPLIFIED LOUDSPEAKER CONTROLLER

The DLC-1500.4 delivers a massive 3000W in a 16 pound chassis. Capable of delivering 1500W into 4, 8, and 16-ohms from any channel pair, or 800W into 4, 8 or 16-ohms all channels driven, this 16lb., 2U loudspeaker controller packs new levels of power into minimal rack space. If that weren’t enough, the DLC-1500.4 can drive 70V/100V hi-Z loudspeakers direct – no internal transformer required.The DLC-1500.4 can drive up to 16 Theory 16-ohm loudspeakers in Lo-Z mode, or up to 400 (!) in Hi-Z mode. You read that right, 400 Theory speakers at 7.5W each.

The DLC loudspeaker controllers from Theory can be configured via its on-board web interface accessible via wired Ethernet, or via its on-board Wifi access point and includes parametric EQ, delay, gain and limiter DSP objects to make system optimization easy.

Full API and modules for Crestron, Control4 and Q-SYS available.

Description :	4-Channel Amplified Distribution Loudspeaker Controller 2U Chassis IP Control via Ethernet or Built-In WiFi Access Point Power Sharing Between Neighboring Channels LoZ and HiZ (70V/100V) Operation
Inputs :	4 x Balanced Analog Audio 4 x RCA Unbalanced Analog Audio 1 x S/PDIF Digital Audio
Outputs :	4 x Speaker Outputs S/PDIF Digital Audio
Trigger :	+12VDC
Audio Operation :	48kHz/24-bit
On-Board DSP :	48kHz/32-bit
DSP Features:	Loudspeaker Processing For All Theory Models 10 Parametric EQ Filters Crossovers Input Trim Signal Routing Gain Delay Polarity Limiter
Frequency Response :	20Hz-20kHz, +/-0.25dB
Power Output :	1500W per channel @ 4, 8, 16-ohms and 70V/100V 800W per channel @ 4, 8, 16-ohms all channels driven 800W per channel @ 70V/100V all channels driven
Voltage Gain :	Variable
Input Sensitivity (selectable) :	+14dBu +4dBu -10dBV (Unbalanced RCA) Microphone
Power Requirements :	Standby: <1W (1/8 power, all ch. driven): 470W
Idle Noise(A-Wt) :	-78dBV
Signal to Noise Ratio :	>106dB
Distortion (1kHz, 1dB below max output) :	<0.02%
AC Operation :	100V-240VAC, 50-60Hz
Terminals :	Eurblock Connector with Parallel Output
Outdoor Capability :	Indoor Use Only
Mounting Points :	Rack Mount Ears Included
Finish :	Matte Black
download:	3.50" H x 19" W x 12.6" D (89mm H x 483mm W x 320mm D)
Weight :	16.5 lbs. (7.5 kg)
Included Accessories :	Rack Ears

Description :

4-Channel Amplified Distribution Loudspeaker Controller
2U Chassis
IP Control via Ethernet or Built-In WiFi Access Point
Power Sharing Between Neighboring Channels
LoZ and HiZ (70V/100V) Operation

Inputs :

4 x Balanced Analog Audio
4 x RCA Unbalanced Analog Audio
1 x S/PDIF Digital Audio

Outputs :

4 x Speaker Outputs
S/PDIF Digital Audio

Trigger :

+12VDC

Audio Operation :

48kHz/24-bit

On-Board DSP :

48kHz/32-bit

DSP Features:

Loudspeaker Processing For All Theory Models
10 Parametric EQ Filters
Crossovers
Input Trim
Signal Routing
Gain
Delay
Polarity
Limiter

Frequency Response :

20Hz-20kHz, +/-0.25dB

Power Output :

1500W per channel @ 4, 8, 16-ohms and 70V/100V
800W per channel @ 4, 8, 16-ohms all channels driven
800W per channel @ 70V/100V all channels driven

Voltage Gain :

Variable

Input Sensitivity (selectable) :

+14dBu
+4dBu
-10dBV (Unbalanced RCA)
Microphone

Power Requirements :

Standby: <1W
(1/8 power, all ch. driven): 470W

Idle Noise(A-Wt) :

-78dBV

Signal to Noise Ratio :

>106dB

Distortion (1kHz, 1dB below max output) :

<0.02%

AC Operation :

100V-240VAC, 50-60Hz

Terminals :

Eurblock Connector with Parallel Output

Outdoor Capability :

Indoor Use Only

Mounting Points :

Rack Mount Ears Included

Finish :

Matte Black

download:

3.50" H x 19" W x 12.6" D (89mm H x 483mm W x 320mm D)

Weight :

16.5 lbs. (7.5 kg)

Included Accessories :

Rack Ears

DLC-1500.4 AMPLIFIED LOUDSPEAKER CONTROLLER

DLC-1500.4 SPECIFICATIONS

DLC-1500.4 DOWNLOADS

DLC-1500.4 Quick Start Installation Guide

DLC-1500.4 GALLERY