DLC-250.4 AMPLIFIED LOUDSPEAKER CONTROLLER

The DLC-250.4 is small but mighty. Capable of delivering 250W into 4, 8, and 16-ohms from any channel pair, or 125W into 4, 8 or 16-ohms all channels driven, this little 6lb., one-half rack loudspeaker controller packs new levels of power into minimal rack space. If that weren’t enough, the DLC-250.4 can drive 70V/100V hi-Z loudspeakers direct – no internal transformer required.

The DLC-250.4 can drive up to 16 Theory 16-ohm loudspeakers in Lo-Z mode, or up to 64 in Hi-Z mode – all from a half rack chassis!

The DLC loudspeaker controllers from Theory can be configured via its on-board web interface accessible via wired Ethernet, or via its on-board Wifi access point and includes parametric EQ, delay, gain and limiter DSP objects to make system optimization easy.

Full API and modules for Crestron, Control4 and Q-SYS available.

Description :	4-Channel Amplified Distribution Loudspeaker Controller Half-Rack Chassis IP Control via Ethernet or Built-In WiFi Access Point Power Sharing Between Neighboring Channels
Operation :	LoZ and HiZ (70V/100V) Operation
Inputs :	4 x Balanced Analog Audio 4 x RCA Unbalanced Analog Audio 1 x S/PDIF Digital Audio
Outputs :	4 x Speaker Outputs S/PDIF Digital Audio
Trigger :	+12VDC
Audio Operation :	48kHz/24-bit
On-Board DSP :	48kHz/32-bit
DSP Features:	Loudspeaker Processing For All Theory Models, plus: 10 Parametric EQ Filters Crossvoers Input Trim Signal Routing Gain Delay Polarity Peak and RMS Limiters
Frequency Response :	20Hz-20kHz, +/-0.25dB
Power Output :	250W per channel @ 4, 8, 16-ohms and 70V/100V 125W per channel @ 4, 8, 16-ohms all channels driven 125W per channel @ 70V/100V all channels driven
Voltage Gain :	Variable
Input Sensitivity (selectable) :	+14dBu +4dBu -10dBV (Unbalanced RCA) Microphone
Power Requirements :	Standby: <1W (1/8 power, all ch. driven): 70W
dle Noise(A-Wt) :	-78dBV
Signal to Noise Ratio :	>106dB
Distortion (1kHz, 1dB below max output) :	<0.02%
AC Operation :	100V-240VAC, 50-60Hz
Terminals :	Eurblock Connectors
Outdoor Capability :	Indoor Use Only
Mounting Points :	Surface or Rack Mount (with optional accessories)
Finish :	Matte Black
Dimensions :	1.75" H x 8.7" W x 11.7" D (44mm H x 221mm W x 297mm D)
Net Weight :	6.2 lbs. (2.8 kg)
Optional Accessories :	Single and Dual Unit Rack Mount Kit Surface Mount Kit

Description :

4-Channel Amplified Distribution Loudspeaker Controller
Half-Rack Chassis
IP Control via Ethernet or Built-In WiFi Access Point
Power Sharing Between Neighboring Channels

Operation :

LoZ and HiZ (70V/100V) Operation

Inputs :

4 x Balanced Analog Audio
4 x RCA Unbalanced Analog Audio
1 x S/PDIF Digital Audio

Outputs :

4 x Speaker Outputs
S/PDIF Digital Audio

Trigger :

+12VDC

Audio Operation :

48kHz/24-bit

On-Board DSP :

48kHz/32-bit

DSP Features:

Loudspeaker Processing For All Theory Models, plus:
10 Parametric EQ Filters
Crossvoers
Input Trim
Signal Routing
Gain
Delay
Polarity
Peak and RMS Limiters

Frequency Response :

20Hz-20kHz, +/-0.25dB

Power Output :

250W per channel @ 4, 8, 16-ohms and 70V/100V
125W per channel @ 4, 8, 16-ohms all channels driven
125W per channel @ 70V/100V all channels driven

Voltage Gain :

Variable

Input Sensitivity (selectable) :

+14dBu
+4dBu
-10dBV (Unbalanced RCA)
Microphone

Power Requirements :

Standby: <1W
(1/8 power, all ch. driven): 70W

dle Noise(A-Wt) :

-78dBV

Signal to Noise Ratio :

>106dB

Distortion (1kHz, 1dB below max output) :

<0.02%

AC Operation :

100V-240VAC, 50-60Hz

Terminals :

Eurblock Connectors

Outdoor Capability :

Indoor Use Only

Mounting Points :

Surface or Rack Mount (with optional accessories)

Finish :

Matte Black

Dimensions :

1.75" H x 8.7" W x 11.7" D (44mm H x 221mm W x 297mm D)

Net Weight :

6.2 lbs. (2.8 kg)

Optional Accessories :

Single and Dual Unit Rack Mount Kit
Surface Mount Kit

DLC-250.4 AMPLIFIED LOUDSPEAKER CONTROLLER

DLC-250.4 SPECIFICATIONS

DLC-250.4 DOWNLOADS

DLC-250.4 Quick Start Installation Guide

DLC-250.4 GALLERY